View LX40-12BS_4739284.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
NEW
Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
LX Series Overview
Hirose's next generation of interface connectors further reduces the mounting height of the receptacle by approximately 30% (compared with the 3200 Series receptacle). High durability, secure mating, electrostatic protection and ease of operation guarantees reliable and consistent performance in demanding consumer applications.
Lower Profile
2.9
Features
1. Low profile on the PCB
When mounted on the PCB surface the receptacle height is 2.0 mm.
Existing 3200 Series
LX Series
2. Strong Construction
Use of metal shell and advanced plastics guarantees that fully mated connectors will withstand 30 N max. force applied on the plug in any direction.
Strong Construction
3. High durability
5000 mating/un-mating cycles without any degradation of electrical or mechanical performance. Tactile sensation when mating confirms complete mated condition and assures secure retention of the plug.
30N
4. Sequenced contact mating
The protection of the circuit is assured by having the 2 contact at each end of the receptacle protrude forward by 0.5 mm, with electrical wipe of 1.45 mm. Location of the circuit protection contacts can be changed as required. Remaining contacts electrical wipe is 0.95 mm.
30N
5. Incorrect Insertion Prevention
Connectors will not be damaged when angled or reverse plug insertion is attempted.
Incorrect insertion prevention
6. Safety plug release
Plug will release when an excessive pull force is applied to the cable.
7. RoHS Compliant
All components and materials comply with the requirements of the EU Directive 2002/95/EC.
Angled insertion
Reversed insertion
2
2008.5w
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willInterface Connectors with 2.0 mmstatus on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. LX SeriesUltra Low-profile be discontinued soon. Please check the products Mounting Height
Product specifications
Current rating Ratings Voltage rating Characteristic 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage 70mo max. 1000 Mo min. (dry) 10 Mo min. (high humidity) No flashover or insulation breakdown. 0.5A (1A max. can be carried via 2 random contacts) 50V AC Specification 100mA DC 100V DC 250V AC / one minute With corresponding connector. 5, 000 times Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles, 3 axis. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, acceleration of 98 m/s2, 2 hours, 3 axis. Temperature: - 55c +5c to +35c +85c +5c to +35c Time : 30 5 30 5 (Minutes) Operating temperature range : -40c to +70c Storage temperature range : -55c to +85c (Note) Conditions
4.Mating/un-mating forces Mating: 10N max., un-mating: 4N min. 5. Durability (mating/un-mating) 6. Shock Amount of change of contact resistance: 20mo max. No electrical discontinuity of 1 sec. Max. Contact resistance: 20mo max. Contact resistance: 20mo max. Insulation resistance: 10Mo min. Contact resistance: 20mo max. Insulation resistance: 10Mo min. No heavy corrosions
7. Vibration
8. Temperature cycle 9. Salt spray
5% water solution at 35C for 48 hours
Note : Includes temperature rise caused by current flow.
Materials / Finish
Receptacles
Component Insulator Contacts Shell Material Synthetic resin Copper alloy Stainless steel Finish/Color Black Contact area: Gold plated Mounting area: Gold flash plated Soldering area: Gold flash plated Remarks UL94V-0 ---------------------------
Plugs
Component Insulator Contacts Metal shield Covers Strain relief clamp Self tapping screws Material Synthetic resin Copper alloy Stainless steel Synthetic resin Copper alloy Steel Finish/Color Black Contact area: Gold plated Termination area: Gold flash plated -------------Black -------------Trivalent black chromate Remarks UL94V-0 --------------------------UL94V-0 -------------Screw size: M2
Ordering information
Receptacles
1 2
Series number Termination type 40 : Solder type 60 : Right angle SMT : LX
LX 60 - 16 S
1 2 3 4
Plugs
3 4
Number of contacts : 12, 16, 20 Contact type P : Male contact (Plug) S : Female contact (Receptacle)
LX 40 - 16 P
1 2 3 4
Bushing
5
Bushing : Dia. 4.0mm cable BS(4.0) BS(4.5) BS(5.0)
LX 40 - 16 BS(4.5)
1 2 3 5
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products SeriesUltra Low-profile Interface Connectors with 2.0 mm Mounting Height LX status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Receptacles
12 pos.
(5.5) P=0.5 2.55
No.12
No.1 2
6.5
R0
4 10.6 O1 3.6
.5
BRecommended PCB mounting pattern
Part number LX60-12S LX60-16S LX60-20S CL No. CL245-0018-3 CL245-0001-0 Reel packaging (2000 pieces/reel) YES
3.8 2.8 1.5 5.7 PCB edge 1.9 4 6.5 7.8 1.9 Land area No conductive traces in this area
Packaging
RoHS
2O1 .1 Ho le
(5.5) P=0.5 0.35 1.2 2.55 No.1 2 6.5 0.3
.5 R0
CL245-0016-8
16 pos.
(7.5) P=0.5 2.55
20 pos.
(9.5) P=0.5
No.16
No.1 2
6.5
.5 R0
0.8 O1 3.6
No.20
0.8
5 12.6
6.7 14.6
0.8
O1 3.6
BRecommended PCB mounting pattern
(7.5) 1.2
BRecommended PCB mounting pattern
2-
(9.5)
Ho le
1.1
Ho
le
5.7
1.2 7 10.5 11.8 1.9 Land area 0.3 5.7
2-O
P=0.5
0.35
O1
.1
P=0.5
0.35
3.8 2.8 1.5
0.3
PCB edge 1.9
5 8.5 9.8
3.8 2.8 1.5 PCB edge 1.9 No conductive traces in this area
1.9 Land area
No conductive traces in this area
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willInterface Connectors with 2.0 mmstatus on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. LX SeriesUltra Low-profile be discontinued soon. Please check the products Mounting Height
Plugs
12 pos.
O5 .9
(R
14.8
8
3.2
)
21.4
(R
Part number LX40-12P LX40-16P LX40-20P
CL No. CL245-0019-6 CL245-0002-3 CL245-0017-0
Packaging
RoHS
No.1
No.12
1
YES
16 pos.
.4 O6
20 pos.
O6 .9
(R
3.
16.8
8)
8
(R
3.
18.8
6.2
* Cable with overmolded bushing shown for reference only. Not supplied.
5.1
4 1.
)
8.4
8)
21.4
5.1 6.2
21.4 5.5
(R 1. 4)
(R
No.1
No.16
No.1
No.20
Bushing
Part number LX40-12BS(4.0) LX40-16BS(4.5) LX40-20BS(5.0)
CL No. CL245-0020-5 CL245-0021-8 CL245-0022-0
6.2
4 1.
)
Packaging
RoHS
100 pieces / bag
YES
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products SeriesUltra Low-profile Interface Connectors with 2.0 mm Mounting Height LX status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BReceptacle Packaging Specifications
Embossed carrier tape dimensions
Unreeling directions
C 1.75 B 4 A 4
.5 O1
2
(mm)
Part number
LX60-12S LX60-16S LX60-20S
A
B
C
24
11.5
12
Reel dimensions
Unreeling directions
O380
O80
D (Inside dimension) E (Outside dimension)
(mm)
Part number
LX60-12S LX60-16S LX60-20S
D
E
25.5
29.5
30
O1 3
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willInterface Connectors with 2.0 mmstatus on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. LX SeriesUltra Low-profile be discontinued soon. Please check the products Mounting Height
Receptacles Recommended Temperature Profile
(c)
0 PEAK:250 +5 c
250
HRS test conditions
Solder composition Paste, 96.5%Sn/3.0%Ag/0.5%Cu
230c min. 200 180c 150 150c 9030s 9010s
Test board Glass epoxy 35mm x 35mm x 0.8mm thick The temperature profiles are based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Contact your solder paste and equipment manufacture for specific recommendations.
100
50
BApplicable Plug Cable
(mm) Part number LX40-12P LX40-16P LX40-20P Cable diameter O4 max. O4.5 max. O5 max. O0.6 mm max. (AWG 30 to 32 or equivalent) Wire size
Note 1: Applicable cable sizes are guidelines. (There may be slight differences depending on the cable outer insulation) Note 2: Cables must be attached using single piece overmolded bushings on the cable. Note 3: Please refer to applicable Cable Termination Procedures Manual for correct plug assembly and cable termination. Note 4: Contact HRS for cable assemblies.
BMated Condition Dimensions
Receptacle 2 1.4 Plug 2 (mm)
6
0.5

▲Up To Search▲

Price & Availability of LX40-12BS

	To Download LX40-12BS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .